If you are planning on upgrading your motor for some street/strip action, there is a good chance you’ll should also beef up your ignition program as well. The MSD Digital 6AL ignition package is one of the most widely used ignition containers in the high-performance market since it works with nearly every engine. In this particular video, Jeremy Stoermer demonstrates how to install and troubleshoot the particular 6AL ignition box.
The key to a great installation begins with to place the 6AL ignition container. You want to mount it inside a location that’s both readily available, and not around anything that can harm the ignition container. The 6AL ignition container comes with wires for the battery power positive and negative, individuals both need to be attached straight to the battery to prevent any kind of ignition-related issues.
MSD designed the 6AL to work with numerous types of vendors and crank triggers — this allows the ignition container to provide power to engines of horsepower levels. This higher level of compatibility makes it easy in order to wire the 6AL to different ignition system components. When you’re done setting up the 6AL, you can check when the system is functioning properly due to built-in LED on the container.
There’s often the possibility for unforeseen problems when installing aftermarket top of the line parts, but to solve these types of problems you don’t have to be an expert mechanic. MSD provides included in this video several methods for how to figure out some of the most typical issues users might have having a 6AL ignition box.
Make sure you watch this particular video if you’re looking to update your ignition to a 6AL unit from MSD. There are several great tips that will make the procedure much easier.