Pinon position plays an important role in just how much traction your car will get at the monitor. The exact angle that you set is determined by your vehicle, horsepower,, and the tire you are using, just to name a few factors. In this video, Dave Zimmerman through Team Z . Motorsports goes over how you can properly set a pinon position.

Before you begin, it’s generally good to make sure you have the right equipment for the job. You’ll need the ideal wrenches for your specific suspension to produce adjustments, a tape measure, plus an angle finder. You’ll wish to visually inspect each wheel to ensure it’s in the center of the wheel starting, the gap should be the same to both sides of the tire. You will need to furthermore take a look to make sure the rear end is definitely centered under the car — this could be done by using different points in the back of the car as guns.

If the rear end is too significantly forward or not centered, you’ll have to adjust it before you set the particular pinion angle. This can be done with the adjustable suspension parts you have selected to use for your rear suspension. You are able to verify if the rear end is truly based up by finding the exact middle of the car, and then taking dimensions from that to the rear end. When those are the same, then you know the tail is at true center.

After inspecting that everything is definitely straight and making sure the drive line is at zero, you can start the process of environment the rearend’s pinion angle. You are able to draw a diagram of exactly what angle your driveshaft to help you arranged the pinion angle when you start. The particular angle finder needs to be set for the yoke coming out of the rear end to find out your current pinion angle. You include the angle from the yoke plus driveshaft angle to get the current pinion angle. Now that you have the pinion position you can begin the process of adjusting the suspension system to change the pinion angle for your desired measurement.

Be sure you check out the entire video from Group Z Motorsports to learn all the methods of setting a pinon position. And if you need adjustable suspension components to make changing your pinion position possible, you can check out Team Z’s website right here .

This post was originally published on this site